Specifications:

 

CPU		32-bit CPU
Configuration		Grit rolling plotter
Drive method		Digital servo drive
Max. cutting speed		58.5 inches per second (45 degree direction) 41.3 (axis direction)
Cutting force		Max. 600 gf in 48 steps
Axial acceleration		Max. 39.2 m s2 (4 G) in 8 steps
Max. cutting area (W x L) (*1)		64 in x 164 ft 1626 mm x 50 m
Guaranteed precision cutting area (*1)		63 in x 32 ft, 35.2 in x 50 ft
Mountable media width(*2)		Min. 1.96 in Max. 72.83 in
Max. cross cut width		64 in
Number of push rollers		4 rollers
Compatible roll media diameter		Min. 2.99 in Max 7.8 in. (Max diameter is 6.29 in when included flange is installed)
Mechanical resolution		0.005 mm
Programmable resolution		GP-GL: 0.1 0.05 0.025 0.01 mm, HP-GL™: 0.025 mm
Distance accuracy (*2)		Max. 0.1 mm or 0.1 % of plotted length
Repeatability (*2)		Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
Minimum character size		Approx. 5 mm alphanumeric (varies depending on character font and media)
Mountable number of tools		1 tool (cutting blade, plotting pen or pouncing tool) in standard; 2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Blade types		Supersteel (0.9 mm or 1.5 mm diameter)
Pen types		Water-based fiber-tip pen, Oil-based ballpoint pen
Pouncing tool type		Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
Media types (*3)		Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick, Sandblast resist rubber up to 1 mm thick
Compatible paper for pouncing		Regular paper from 0.06 to 0.13 mm thick
Cross-cutter		Built into the tool carriage
Perforation cutting		Supported (performed by force control)
Interface		USB 2.0(Full Speed), Ethernet 10BASE-T 100BASE-TX
Buffer memory		2 MB
Command sets		GP-GL HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)
Condition settings		Dual configuration (save two (2) user settings with eight (8) separate condition settings per user)
Display		Graphic type LCD (3.7-inch, backlight)
Power source		100 V to 240 V AC, 50 60 Hz
Power consumption		AC100-240 V, 50 60 Hz
Operating environment		50 to 95 ºF, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment		60 to 89 ºF, 35 to 70 % R.H. (non-condensing)
External dimensions (W x D x H)		Approx. 84 x 28 x 48 (2130 x 711 x 1219 mm)
Weight (*8)		154 lbs. 195 lbs. w take-up
Included software (*6)		Windows driver, Plotter controller, Graphtec Pro Studio (*5), Cutting Master 4, Graphtec Studio for Mac
Compatible OS (*5)		Windows 10 8.1 7 Mac OS X 10.6 to 10.11 Mac OS 10.12 to 1.14 Graphtec Studio: 10.6 to 10.14 Cutting Master 4: 10.7-10.14
Safety		PSE, UL cUL, CE mark)
EMC		VCCI Class A, FCC Class A, CE mark

===

tab_warranty

The HPN MyExpert Support guarantee is our commitment to Life Time Technical Support. No matter where you are in your products life cycle, we will be here to provide support to your product and make sure you are fully covered.

Often imitated, never duplicated; our dedicated team of technicians are capable of providing support to your product at any point of its life. Whether it be during the setup process or even years down the line where troubleshooting may be required, they ll have your back and provide a solution.

Our MyExpert Support will always be there for you so you can purchase with confidence!

In addition, this Graphtec FC9000 vinyl cutter comes with a 3 Year Parts and Service Manufacturer Warranty from the original date of purchase. Warranty service does not include the cost of freight of the item to or from repair facilities. If parts and or accessories are needed at any time during the warranty period, Graphtec America will send them to you at no charge upon receipt of the defective part. Once the warranty period has ended, parts will be available at market price. Graphtec s full warranty policy can be seen here: Graphtec Standard Warranty

Additional information

Please choose	Without Liftgate Service, With Liftgate Service